Recommended Solera Powered Awning Arms For A 2008 Komfort Trailblazer Travel Trailer

Question:

I have a Dometic 19 foot wide, Model 916GW19.0008 powered awning on a 2008 Komfort Trailblazer travel trailer that id like to get parts to replace the entire awning and support arm assemblies. Its already wired up so I dont need the switch or any internal wiring. Im interested in the standard black fade roller and shade assembly Item # LCV000231497. Can you recommend the support arm assembly that would be best for install on my trailer. My current mount arm is 65-1/2 and have room for up to 78. Can I replace just the arms and use my existing roller with new fabric? Please let me know. Thank you,

asked by: Charles C

Expert Reply:

To replace your current awning arms with Solera Powered Awning Arms you'll need part # LC759517. These arms can splice to the wiring you already have in place for your old Dometic awning. While Solera fabric/roller assemblies are compatible with other brands, the arms are only compatible with Solera branded assemblies.

These arms are 69" in length so they'll fit nicely in place of your old arms. I do recommend using some butyl tape # 344270341411-1 on the brackets during installation to prevent water from leaking in through your screw holes.

The Solera 19' Sand Fade w/ Black Wetherstrip RV Awning # LCV000231497 you referenced will fit these arms and provide a nice clean look for your 2008 Komfort Trailblazer Travel Trailer.

expert reply by: Kevin C