Is the Rubber Part of the Hooks on the Yakima StickUp Bike Rack Available as a Replacement Part
Question:
Rubber on the arm holding frame rubbed away to bare metal. Available replacement part whole arm assy is quite expensive. Any suggestion for cheaper solution that will not scratch bike frame?
asked by: Arthur
Expert Reply:
The rubber piece on the arms of the Yakima StickUp # Y02420 is not available as a separate part. There are a couple of things you can do though to cover the metal of the hook to protect the bikes. You could wrap the area with electrical tape. That would be a good temporary solution but will not look the best.
A better option might be to use liquid electrical tape, # SWC50122. This will also keep out moisture. You would have to apply several coats to get it good and thick.
Another suggestion is to use foam handlebar wrap (available from bike stores) or foam pipe insulation. Either would be a less difficult and more lasting repair. You would just have to find some the right diameter for the hooks.
Product Page this Question was Asked From
Continue Researching
- Q&A: Will Wiring Technique Be the Same When Transferring Roadmaster InvisiBrake to 2020 Jeep Gladiator
- Q&A: 2019 Ford Ranger Separate Brake Tee Install For Roadmaster InvisiBrake
- Q&A: Can Vehicle be Started with Battery Charge Kit # RM-156-25 Installed
- Q&A: The Best Way to Wire a 9-Way Vehicle Connector to a Trailer Side 9-Way Connector
- Q&A: Mid Level Ladder Rack that Fits TS Truxedo Elevate Rails
- Q&A: Recommended Removable Ladder Rack Compatible With A BAKFlip MX4 Tonneau Cover
- Q&A: Ladder Rack That Works With Truxedo TS Rails on 2015 GMC Canyon With 5 Foot Bed
- Article: Trailer Wiring Diagrams
- Article: Rust Prevention
- Article: 2023 Best Gifts for Haulers & Towers
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: What To Look For When Buying Ratchet Straps