What Right Hand Brake Assembly do I Need with the Dexter # 23-112?

Question

Question:

Where the right hand can’t find it

asked by: Steve A

0

Expert Reply:

If you are looking for the right-hand assembly for the Dexter Electric Trailer Brake Assembly with Parking Brake - 12" - Left Hand - 6,000 lbs # 23-112, the part you need is the Dexter Electric Trailer Brake Assembly with Parking Brake - 12" - Right Hand - 6,000 lbs # 23-113.

expert reply by: Bob C

0

Answer 1

For a set of 12 x 2-inch electric drum brakes rated for a 6K axle that include the parking brake feature you can use parts #23-113 (right) and #23-112 (left) from Dexter. These feature a 5-bolt brake flange mounting pattern. Adjustment of these…

view full answer...

Answer 2

Dexter trailer brake assemblies #23-113 and #23-112 have a bracket, see picture, that you would attach a cable to. At the other end of the cable is a lever. When you pull the lever it pulls the cable that pulls the bracket and pushes the shoes out…

view full answer...

Answer 3

Dexter left and right 12 x 2 electric drum brakes #23-112 and #23-113 include a parking brake and are rated for 6K axles. These use a brake flange with a 5-bolt mounting pattern; if you don't have these already they will need to be welded…

view full answer...

Answer 4

With the Timbren axle-less suspension system #ASR35HDS02 you can install 5-bolt electric drum brake assemblies like #23-112 and #23-113. These are left- and right-hand brakes with parking brake mechanisms that are rated for a 6K axle system. You…

view full answer...

Answer 5

You would need the Dexter Electric Trailer Brake Assembly with Parking Brake Left #23-112 and Right #23-113 for each axle to use the brakes as a parking brake. The Dexter Breakaway and Parking Kit for Drum Brakes #T2385200 will give you the cables…

view full answer...

Answer 6

The only Dexter brake assemblies we offer with parking brakes are for 6k axles. For that you would need part #23-112 and #23-113. If your trailer has 12 inch drums on it already and the mounting flanges for brakes on the spindle have a 5 bolt…

view full answer...

Answer 7

The dimensions on the Pollak 7-Circuit-Breaker Junction Box, part #PK52249, are as follows, With the mounting holes on the left and the right the length (right to left) from one edge of the mounting hole tab to edge of the other mounting hole tab is…

view full answer...

Answer 8

I have another option for you, but unfortunately there is not a kit to add parking brakes to the Electric Trailer Brake Kit #AKEBRK-7-SA you were looking at. Instead I recommend the Dexter Electric Trailer Brake Assembly with Parking Brake - 12"…

view full answer...

Answer 9

The Dexter Brake Assembly w/Parking Brake #23-112 and #23-113 are 12 x 2 inch brake assemblies. For a cable you can use #T2385200.

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

What Right Hand Brake Assembly do I Need with the Dexter # 23-112?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching