Cold Side Brake Switch Circuit Wire Color on 2014 Ford F-150
Question:
Can you let me know where to connect the red wire in a 2014 f150 xl. Stop light switch. Thanks
asked by: Tim
0
Expert Reply:
On the 2014 Ford F-150, the cold side brake stop lamp switch circuit is carried by a purple/white wire. You'll want to confirm this by using a circuit tester like # PTW2993. You'll want to tap the red trigger wire from the brake controller into the brake switch wire that ONLY shows voltage when the brake pedal is pressed.
expert reply by:
Mike L
0
Products Referenced in This Question
Product Page this Question was Asked From
Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Round
- Pollak
more information >
Continue Researching
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Semi Trailer Light Function Locations on Heavy Duty 7-Way Pin Connection
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Converting a Semi 7-Way Trailer Connector to an RV 7-Way Trailer Connector
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Recommended Hitch Plate for a 1999 International 4700
- Q&A: Comparing Demco Channel Tongue Trailer Couplers # DM16080-95 & # DM15931-95
- Q&A: Which Trailer Brake Magnets Do I Need to Use
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Gooseneck to 5th Wheel Adapters