RV Entry Door Stair Replacement For 23-1/2 Inch Doorway.

Question:

Sadly my threshhold to ground is 28 inches. I like the sound of the one you showed me... juat a bit too big. Is there a 3 step that would work?

asked by: Ralph S

Helpful Expert Reply:

This model needs a doorway width (from inside flange to inside flange): 23-3/4" - 26-1/4" to be able to properly secure itself in the upright position.

MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR98RR.

So if you are at 23.5 inches you will be a little to narrow to make this work.
I do have a solution for you though, I recommend going with the torklift Glowstep:

TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 25-1/2" Base - 375 lbs # TLA8104.

This will mount and store underneath your door. I like them because you can use them in cramped areas and they are aluminum so you don't have to worry about corrosion anytime soon.

This model requires an entry height of 32-1/2" - 44" inches. If you are higher or lower than this let me know and I can get the right height for you.

expert reply by: David B

Ralph

3/24/2022

Sadly my threshhold to ground is 28 inches. I like the sound of the one you showed me... juat a bit too big. Is there a 3 step that would work?

David B.

3/24/2022

Yes, we have a unit that will work for a 28 inch ground to entryway. It will be a two step version and not three step. TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 2 Steps - 25-1/2" Base - 375 lbs # TLA8102. Entry height: 18-1/2" - 28" Step dimensions: 19" wide x 8" deep Mounting bracket dimensions: 25-1/2" wide x 13-7/8" deep Drop/Rise: 7-1/2" Weight capacity: 375 lbs Lifetime limited warranty