Recommended Tankless Water Heater Replacement For An Atwood GC10A-3E RV Water Heater

Question:

I want to upgrade to on demand tankless. I currently have gc10a-3e What is a good replacement. Looking for ad close to 3gals. min. Any idea

asked by: Parrish

Expert Reply:

I recommend the Furrion RV Tankless Water Heater 60,000 BTU # FR98SR. This unit features a heating capacity of 13,000 - 60,000 Btu, well above that of your Atwood GC10A-3E. To put it in perspective your current water heater produces approximately 20 gallons of hot water per hour, whereas the # FR98SR will produce approximately 144 gallons of hot water per hour.

It has similar dimensions at 12-5/8" L x 12-13/16" W x 19-3/16" D so you'll just need to make some slight alterations to your cutout hole to fill in the gap but the performance output of this unit will be worth the work.

The on-demand hot water and ability to set the temperature to a specific degree instead of the old fashioned arrow knob will make camping much more enjoyable.

The # FR98SR has the following requirements to properly operate:

12VDC Power Input.

7.2-65PSI water Pressure (40-50PSI recommended). I recommend using a water pressure regulator like # CAM40064 to ensure proper water pressure.

11" WC - 14" WC (13" WC recommended). I recommend having a licensed technician check your pressure and adjust your regulator accordingly to ensure proper gas pressure.

If you have any further questions or need any assistance please feel free to reply back.