Determining Replacement Grease Seal for 7,200 lb Trailer Axle
Question:
Is this seal, 010-036-00 the right one for a 7200 pound axle, I see that it is also used on a 7k axle
asked by: Karin S
0
Expert Reply:
The 7,200 lb trailer axle capacity is not a very popular one so we aren't totally sure what hub seal it would need. What you can do is pull off your hub and measure the spindle where the seal rides and if that size is 2.25 inch and the bore on your hub where the seal installs is 3.376 inch then this # RG06-070 would work well for you. If you find something different though let me know and I'll see what you'd need.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: What Does Hole In Rear Hanger For 2-1/2" Wide Hanger Used For?
- Q&A: Where to Find VIN/Serial Number on Boat Trailer
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: How to Choose the Right Trailer Hitch Class
- Article: What To Look For When Buying Ratchet Straps
- Article: How to Charge a Dump Trailer Battery
- Article: How to Use a Roof Rack (Like a Boss)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)