What U-Bolts Would Work With My 2021 Eclipse Altitude 3218MM After Installing Shock Absorbers
Question:
Hello, I have a 2021 Eclipse Attitude 3218MM. It’s a triple axle toy hauler with 7k axles. I believe this will fit my trailer, however, I don’t think the stock 7 1/4” U-bolts are long enough to accommodate the additional mounting hardware in your kit. I also don’t see you selling any 3” diameter u-bolts longer than what I already have. If you look at the photos, could you tell me if this kit will work or not? Thank you.
asked by: Richard F
Expert Reply:
The Roadmaster Comfort Ride Shock Absorbers # RM-2460-3 would work perfect for your triple axle set up. When it comes to the longer U-Bolts I recommend The MORryde U-Bolts # MR66ZR they are for 5,200 to 7,000 pound round 3 inch axles. They're a little longer then what you already have they come in at 7-3/4 inches. You will also need The U-Bolt Plate # TRTP300200.
Products Referenced in This Question
MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- MORryde
more information >
U-Bolt Plate - 3" Diameter, Round Trailer Axle - 2" Wide Spring - 1/2" Bolts
- Trailer Suspension Parts
- U-Bolt Plates
- Boat Trailer
- Snowmobile Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- TruRyde
more information >
Product Page this Question was Asked From
Roadmaster Comfort Ride Shock Absorbers for Triple Axle Trailers - 5,200 to 7,000-lb Axle
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- Triple Axle
- Roadmaster
more information >
Continue Researching
- Q&A: Will E-Z Flex Triple Axle Suspension Kit With 7-3/4 Equalizers Fit 6,000lb Lippert Axle
- Q&A: Why Do the Dexter E-Z Flex Equalizers Turn Down
- Q&A: MORryde CRE3000 or Dexter E-Z Flex Trailer Suspension Equalizers?
- Q&A: How Thick is Center Trailer Suspension Hanger # 115919
- Q&A: Does The Dexter E-Z Flex Equalizer K71-655-00 Fit 1-3/4" Wide Leaf Springs?
- Q&A: Is There A Greaseable 7-3/4" Long Standard Equalizer?
- Q&A: Availability of 8k Roadmaster Comfort Ride Triple Axle Setup for 2020 Grand Design Momentum 399TH
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Stability Control for Heavy Duty Vehicles
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Overview of Lubricating Grease