Replacement Axle for Smaller Boat Trailer with 1,800 lb Capacity
Question:
I am refurbishing a small boat trailer that needs an axle, hub, and leaf springs. The dimensions of the existing parts are shown below. Can you recommend what parts would fit? I found a CE Smith 1800lb axle that would fit but I could not find a compatible hub assembly for the 8” tire. Thanks for your help Slipper Leaf spring 1 3/4” spring width 23 spring length center to center 9/16” bolt Axle 46.5” spring to spring bearing 55.5 axle hub to hub 60.5 spindle length Tire 4.80-8 Load range B Max load 590 lbs at 60 PSI Bolt 5@4.5”
asked by: Alan B
Expert Reply:
The CE Smith axle part # CE33201GA is the correct axle for your trailer based on all of the specs you mentioned. For a hub that can fit the smallest diameter wheel size you'd want the part # 8-259-50UC1 which can fit wheels down the 10 inch diameter. Then for a 10 inch wheel and tire you could use the part # AM3H490 and you'd be set.
The closest leaf spring to what you mentioned is the part # SP-113275 which is for a 2,000 lb capacity axle and is 23-1/2 inches long. You might need to move your hangers out to accommodate for this longer spring.
Products Referenced in This Question
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/2 Inch Long
- Painted
- Universal Group
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub for Dexter 8-259 Idler Hub
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: Replacement Idler Hub For Tie Down 11029C On 1-1/16" Straight Spindle with 5 on 4-1/2" Bolt Pattern
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Q&A: 5 Lug Hub That Can Fit Spindle with BTR Dimensions
- Q&A: Replacement Dexter Trailer Axles Marked 8-259
- Article: Pewag Snow Tire Chains
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Measuring a Trailer Tire
- Article: Trailer Wiring Diagrams