Will the Dexter Trailer Hub and Drum Assembly 84546UC3 Work with E-Z Lube Spindles
Question:
Would like to use these brake drums on a #84 EZ lube spindle. What dust cover is needed that will clear the grease fitting? Thanks
asked by: David G
0
Expert Reply:
The Dexter Trailer Hub and Drum Assembly part # 84546UC3 is for standard spindles, the Dexter Trailer Hub and Drum Assembly part # 84546UC3-EZ is for E-Z Lube. They have the E-Z Lube Grease Caps part # RG04-040 you need.
expert reply by:
Conner L
0
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: How Many Assemblies Come with Dexter Electric Trailer Brake Kit 23-26-27
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: New Hubs Do not Fit Over Brake Shoes On Trailer
- Q&A: Recommended Replacement Hub and Drum Assembly Kit for a UFP HD-1377-10 Hub and Drum
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Adding Electric Over Hydraulic Disc Brakes