How Can I Install My Taillight Bar with the 4-Way Plug on the Inside Bumper of My 2017 Ram 1500?
Question:
hello i have a 2017 ram 1500 3.6l im putting a tailgate light bar for brakes turnsignals etc. i do not want to plug it in on the outside bumper trailer hitch want to plug in behind the bumper what plug in connecter do i need to do this thank you
asked by: Brian
Expert Reply:
In addition to your current 4-way wiring plug, you need the additional 4-Pole Wiring Kit # 18252 to harness. This is a great measure because if something ever happens to the light itself, you can simply unplug it from your current setup. With the # 18252, you will match the wires to splice into your vehicle's current wiring with the following colors and functions:
- Yellow: left turn
- Green - right turn
- brown: running lights
- white: ground to frame
I went ahead and attached a video that shows the installation of a similar harness with a light bar starting at timestamp 7:00. Even though this is installed on a Silverado 1500, the process is virtually the same for your Ram 1500.
I recommend that the mounting location is not close to any moving components and is accessible enough to plug in the light bar's harness. Once you find that location, I recommend using the mounting bracket plate # 18144 along with the no-drill mounting bracket # 18136 to attach the plug.
If you need a great option for a taillight bar, I recommend the Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn - 4-Pole Flat # RA960134. This bar comes with super bright LEDs and is designed to work specifically on your 2017 Ram 1500. I went ahead and attached an installation video that shows the 4-way plug on this light being installed on the inside of the bumper. The process on your light bar will be very similar except you will have the additional installation of the mount and bracket.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn - 4-Pole Flat - 60" Long
- Vehicle Lights
- Accent Light
- Tailgate Bar
- Single Light
- LED Light
- Light Assembly
- Strip
- Red/White
- Rampage
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Charge RV Batteries
- Q&A: Replacement for Atwood 70254 RV Landing Gear Switch
- Q&A: Comparing Viair Portable Compressors For A Tandem Axle Airstream Travel Trailer
- Q&A: Is Light Kit Needed for Covered Bike Rack at Rear of Fifth Wheel Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Does The Demco Baseplate # DM77YV Require That You Trim The Air Shutters/Dam On A Ford Maverick
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Installing 7-Way Wiring Connector to Trailer For Reverse Light Function
- Q&A: Availability of Locking Hitch Pin with 4-1/2 Inch Usable Span
- Article: Replacement Automotive Lighting
- Article: Carrying Bikes While Towing a 5th Wheel Camper Trailer
- Article: Performance Chips and Modules
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer