Can a Trailer Ball Be Mounted Directly To The Bumper of a 1999 Dodge Dakota
Question:
can you attach the 2inch ball hitch directly on the bumper of a 1999 dakota
asked by: Mick L
Expert Reply:
Some vehicles are designed with a hole in the bumper for attaching a ball for towing. You need to check your owners manual or with your dealer for the towing capacity of your Dakota. You should also check with the Dealer to see if the bumper on your Dakota is rated for towing. I have attached an FAQ article that has tips on how to tow a trailer.
You will need to measure the hole in the bumper to make certain you have the correct diameter shank on the ball you wish to attach. If you have a 1 inch diameter hole in the bumper of your Dakota, then the Hitch Ball, part # 63845, you referenced, would be a fit.
If your Dakota does not have the factory trailer connector installed, I would recommend the Tow Ready Custom Fit Vehicle Wiring Harness, part # 118329. This harness plugs directly into existing wiring, and requires no cutting or splicing of wires. I have linked you to an installation video for a 1999 Dakota.
Once you have installed the wiring harness, I would recommend the mounting bracket, like part # 18144. This will give you a location to safely secure the wiring connector. I have linked you to an installation video for this mounting bracket.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Valet RVR9 Remote-Controlled Trailer Dolly - Wireless Remote - 9,000 lbs
- Q&A: Does a Trailer have to be towed Level or Can it be Off Up or Down
- Q&A: Suspension Lift Recommendation for 2014 Springdale Trailer to Allow it to Be Towed Level
- Q&A: Recommended Torque for Tow Ready Hitch Ball # 63845
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Ideal Height for a Ball When Towing a U-Haul Trailer?
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Should Westlake 215/75R17.5 Trailer Tire Be Inflated to Max PSI
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Article: Trailer Hitch Balls
- Q&A: Towing Capacity for 2018 Chevy Traverse AWD