Replacement Bearings and Brakes for 7,000 Pound Lippert Axle
Question:
Im planning on replacing brakes and bearing on my Dutchman Voltage 3200. Without actually going to the trailer and pulling off a wheel can you help identify hubs, bearing and brake assemblies I would need? Im sure the brakes are 12x2, but Im confused on the wheel hub as there are two different sized studs and am not sure what size mine has. The Lippert number on the axles is: LCI70-SB-92-5-74-5-N0SP-0S-L-86517-7227-18PT. Thanks
asked by: David R
Expert Reply:
I reached out to Lippert and the correct hub and drum assembly for your Dutchman Voltage 3200 is the Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # LC53UD. This hub has 1/2" diameter x 1-5/16" long wheel studs. It uses a # 25580 inner and # 14125A outer bearing. This hub and drum is compatible with 12" x 2" brake assemblies like the # 23-180-181.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Lippert
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: Replacement Trailer Idler Hubs For a 2007 Tracker TrailStar Boat Trailer
- Shop: Bestop Supertop for Truck 2 Collapsible Bed Cover - Black Diamond
- Shop: Tonneau Cover
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Incandescent Tail Light for Trailers over 80" Wide - Submersible - 8 Function - Driver Side
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Trailer Hitch
- Search Results: 118494
- Q&A: Replacement Leaf Springs for 2012 Dutchman Voltage 3905
- Q&A: Difference Between Dexter Trailer Brake Assemblies and Other Brands
- Q&A: Replacement Leaf Spring for 7,000 Pound Lippert Axle
- Q&A: Troubleshooting Trailer Wiring Where Only Left Hazard Light Works
- Q&A: What Tire Sensors Can I Use With The Factory TPMS System On My 2021 GMC Sierra 3500HD Denali?
- Q&A: Compatibility of Dexter Drum Hub on Lippert Axle of 2017 Jayco North Point 5th Wheel
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Search Results: 26 inch leaf spring
- Search Results: lippert brake
- Search Results: leaf springs
- Search Results: akebrk~7~sa
- Search Results: rv brakes
- Search Results: break drums
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-219-9UC3-A Review
- Video: Bearing Repacking and Grease Seals Installation
- Video: Review of Powerbuilt Lubricants Sealants Adhesives - Greasing Tools - ALL647646
- Video: Lippert Trailer Hub and Drum Assembly Installation