Replacement Hub and Drum Assembly for 12 x 2 Inch Brakes
Question:
We are looking to replace the trailer hubs on our 1988 Airstream trailer, 32 Excella. In 2009 the original axles were replaced with GKN 4500# using the original hubs which are HD-1206. 12 x 2, 6 bolt on 5-1/2 circle. What do you suggest for replacement hubs?
asked by: Mike &
Expert Reply:
We do have some possible replacement trailer hubs for your 1988 Airstream, but I do recommend measuring the spindle and/or checking the bearing and grease seal numbers to make sure everything matches up. The Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 # AKHD-655-6-EZ-K should be the replacement that you're looking for and it uses the following:
Inner Bearing - # 25580 (1.75" inner diameter)
Outer Bearing - # 15123 (1.25" inner diameter)
Grease Seal - # GS-2250DL (2.25" inner diameter)
Attached is an installation video of this hub and drum kit for you to check out.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Shop: Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Peterson Certificate Holder with Pouch - Rectangle - Aluminum/Vinyl
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs
- Shop: Document Holder - Trailer Round Certificate Holder w/ Cap
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs
- Shop: Buyers Products Weld-On Safety Chain Retainer For 3/8" Chain
- Search Results: safety chain attachments
- Search Results: 7000 lb dexter axle
- Q&A: Is It Possible To Use 17-1/2" Wheels For 5/8" Studs On Hub With 9/16" Studs?
- Q&A: Replacement Hub and Drum Assemblies with Inner Bearing 25580 and Outer Bearing 15123
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Recommendation For Hub Upgrade For Mobile Home Axle
- Q&A: Replacement Hub for #42 Spindle on Homemade Trailer
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Replacement Hubs Compatible with Dexter Mobile Home Axle
- Search Results: tow chains
- Video: Curt Push-To-Test Trailer Breakaway Kit Review
- Video: Review of Bright Way Trailer Breakaway Kit - 3802348
- Video: Review of Curt Trailer Breakaway Kit - Kit with Charger - C52042
- Search Results: wire connectors
- Search Results: 7~way
- Search Results: distribution box
- Search Results: wiring block