Replacement Passenger Fender for a Demco Kar Kaddy 260

Question

Question:

I have an older Kar Kaddy 260. With the recent snowstorm, I had a tree branch fall in my driveway and cracked my passenger-side fender. Do you carry a replacement?

asked by: Douglas

0

Expert Reply:

I'm so sorry to hear about your fenders! We do carry the replacement you need for your older Demco Kar Kaddy 260 tow dolly. The passenger's side fender replacement you need is the # DM32VR. This fender also comes with the assembly for the LED brake, tail, and turn signal light.

expert reply by: Bob C

0

Answer 1

Thanks for passing that on! I am posting this on our site with your pictures to other owners of the 2022 Chevy Bolt EV that the Draw Tite hitch part #24956 does fit!

view full answer...

Answer 2

I do have an option for you but there are no custom-fit plug and play trailer wiring harnesses available for a 2022 Chevrolet Bolt EV. That said, we do still have an option, the Curt #C59496. If you don't already have a hitch picked out, I…

view full answer...

Answer 3

The Replacement Hub Assembly for Demco Kar Kaddy #DM04369 that you referenced is a totally sealed hub that does not require any greasing. If you were to try and open it you'd actually end up damaging it.

view full answer...

Answer 4

The replacement steering stabilizer for your Kar Kaddy 2 is part #DM01729-30. The Kar Kaddy 2 was a brown and this replacement shock is black but will still work just fine for you.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Replacement Passenger Fender for a Demco Kar Kaddy 260

Product Page this Question was Asked From

Continue Researching