Replacement Motor Head for HappiJac Electric Camper Jacks LC736514-ELKIT

Question

Question:

LC736514-ELKIT. Would part #LC759927 be a compatible replacement head?

asked by: Patricia

0

Expert Reply:

You do indeed have the correct part to replace the heads on the HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-ELKIT, which is the following part number:

- Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks # LC759927

I verified for you that this is the correct replacement head.

expert reply by: Kyle S

0

Answer 1

In order to replace the motors on the HappiJack Truck Bed Camper Jacks 4150 and 4500 you'll need an update kit, the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems part #LC733960-182524 which comes with new motors and…

view full answer...

Answer 2

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Answer 3

The HappiJac Electric Truck Camper Jack System #LC736514-ELKIT is the replacement kit for the 4100 series jacks that you have. It uses the same Replacement Jack #LC736514 and Motor Head #LC759927 for the front and rear jack positions.

view full answer...

Answer 4

The Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks #LC759927 will unfortunately not work with your current 4800 series jacks. Since the 4800 series jacks have been discontinued, I recommend upgrading your system to the newer…

view full answer...

Answer 5

I've confirmed with Lippert that the Replacement Clutched Motor Head for HappiJac Truck Camper Jacks #LC182515 is the correct replacement motor for your HappiJac 4600. The part #LC759927 would not fit.

view full answer...

Answer 6

We have replacement legs for the HappiJack truck camper systems like the part #LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the #LC736514 which has 34-1/2 inches of lift and a 2,200 lb capacity but the legs themselves…

view full answer...

Answer 7

Since you are looking for a replacement motor head assembly for your HappiJac 4560 jacks, it sounds like they have already been converted to electric. That would make the Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks #LC759927 the…

view full answer...

Answer 8

The heads that come with the Replacement Motor Heads w Circuit Board and Remote #LC733960 measure 9-1/8" from the bolt hole that connects them to the legs up to the topmost part of the motor (see attached). Hopefully this will be enough…

view full answer...

Answer 9

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...

Answer 10

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 11

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 12

I don't know what type of brackets were used on your 2022 Heartland RV Torque 5th Wheel but we carry the #LC349975, which can really only be installed at one height since they have lip that butts up against the bottom of the I-Beam. If clearance…

view full answer...

Replacement Motor Head for HappiJac Electric Camper Jacks LC736514-ELKIT

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching