Replacement 1/2-13 Wheel Bolt For Snow Trailer

Question

Question:

I have a snow trailer that. has 1/2x13 Threadsx1 Do you have any wheel bolts that will fit?

asked by: Morris Q

0

Expert Reply:

The closest stud we have is the Replacement Wheel Stud, Screw-In # 25-53. This bolt measures 2" in length and has the 1/2"-13 thread pitch you're looking for.

To make these work you could trim these bolts down to size, and they'd work just fine.

expert reply by: Bryce D

0

Answer 1

I spoke with my contact at Redline and he said that the Replacement Screw-In Wheel Stud, #25-53, is an industry standard grade 5. This replacement wheel stud will be equivalent to, or surpass, the load capacity of the old lug bolts that you are…

view full answer...

Answer 2

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 3

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 4

We don't currently carry the wheel you're looking for or have a similarly designed wheel so I've linked our selection of 14" wheels below that you can look through. We do have the Westlake St205/75R14 radial tire in a load range D…

view full answer...

Answer 5

Typically, a wider tire will offer more stability, but with a small, light trailer any advantage provided by the wider tire would be tiny. There are some differences in the two tires you mentioned that could possibally make the tire for your setup.…

view full answer...

Answer 6

First of all, thank you for your service. Unfortunately at this time we don't offer a military discount, but we do have free shipping most of the time on orders like this one. To confirm your fit, we have two sets of jounce springs available from…

view full answer...

Answer 7

The trailer tire size ST145/R12 is a very stable size that would work well on your snowmobile trailer. It looks like you have a 5 on 4-1/2 inch bolt pattern so you could use the part #AM31202 and have a great looking wheel and tire combo in the size…

view full answer...

Answer 8

You likely aren't going to notice any difference at all. A 145/R12 tire, like part #AM10140, is around 21.3 inches in diameter and a 20.5x8-10, or a 205/65-10 to use the current sizing, around 20.5 inches. So your current tires are less than an…

view full answer...

Answer 9

It is potentially possible to change a hub from bolts to standard screw-in wheel studs. In order to do this a number of features have to match up between the bolts and studs. The diameters of both the original bolts and the replacement studs must be…

view full answer...

Answer 10

I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and has a 5 on…

view full answer...

Replacement 1/2-13 Wheel Bolt For Snow Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching