Adding a 7-Way Connector to 2019 Subaru Forester with Existing 4-Way
Question:
Is the answer for the 2018 about going from a 4-way to a 7-way also true for the 2019 Subaru Forester?
asked by: Diana B
Expert Reply:
Yes, the answer applies to your 2019 Subaru Forester as well. You can install a 7-Way connector on your 2019 Subaru Forester that is already equipped with a 4-Way. If you will only need to power the basic signal lights on the trailer that is equipped with a 7-Way then you can use the Hopkins Adapter # 37185. This will plug right into the existing 4-Way on your Forester to provide both a 7-Way and 4-Way on the other end. After attaching the white ground wire to a bare metal surface the additional wires can simply be tied off as they won't be needed.
If however you plan on towing a trailer that is equipped with electric brakes you will instead want to install the Universal Wiring Kit # ETBC7. This kit includes everything needed to convert the existing 4-Way to a fully functional 7-Way (and 4-Way), along with the additional wiring and circuit breakers needed to install a brake controller.
Then for a brake controller I recommend the Tekonsha Prodigy P3 # 90195. This is a proportional controller that will activate the trailer brakes at the same time and with the same intensity that you apply them in your Forester. It features an easy-to-read digital display, storable settings, and continuous diagnostics that will alert you to any potential issues.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller Installation on a Ford Full-Size Van
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How To Connect 4-Way Flat Vehicle Connector To 7-Way on Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Parts Needed to Install 7-Way Trailer Connector on 2021 Honda Odyssey
- Q&A: Trailer Hitch for a Lance Travel Trailer
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Q&A: Parts Needed For Tekonsha Prodigy P2/P3 Trailer Brake Controller on 2001 Ram 1500 No Tow Package