Amperage Draw of The Solera Power Awning Replacement Motor # LC266149
Question:
How many amps does this motor pull when operating?
asked by: Colin H
0
Expert Reply:
The amperage that the Solera Power Awning Replacement Motor # LC266149 draws will vary based on the awning length and if it is rolling in our out. The motor will pull no more than 15 amps at any given time. When the motor is being wound in it will pull between 10 and 12 amps depending on the length and arms the awing is connected to. When going out the amperage is quite lower as the awing arm strut is helping to push the awning open.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Replacement Motor for Solera Power RV Awnings Manufactured before 2015
- Accessories and Parts
- RV Awnings
- Motors
- Solera Replacement
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Weight of 21K Demco Hijacker AutoSlide 5th Wheel Hitch
- Q&A: Replacement for AL-KO 1530116 and 1530117 Brakes
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: No Turn or Brake Signals on Trailer on a Jeep Liberty with Tow Ready Harness 118524
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Install an RV Awning From Scratch
- Article: How to Choose the Right Trailer Hitch Class