bing tracking image
Q & A Icon

Finding Correct Brake Controller Output Circuit on Jayco Seneca 37RB Motorhome  

Question:

Trying to connect to a 2015 Jayco Seneca 37RB, for some reason there are to blue wires for the brake controller. I only see one at the 7-way connector. Any advise as to which one to connect

0

Expert Reply:

Your best bet would be to install the brake controller, then try both of the blue wires you found, one after the other. Use a circuit tester like # PTW2993 on the pin in the 5:00 position in the 7-way trailer connector. If you have the correct wire, that pin will show power while the manual brake switch on the brake controller is activated.

expert reply by:
0
Mike L
7-Way Trailer Connector Brake Output Pin Location
7-Way Trailer Connector Brake Output Pin Location
(click to enlarge)

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>