Parts Needed to Install Prodigy P3 Brake Controller in 2021 Ford Bronco Sport with 4-Way

Question:

Two questions: 1 I already have a Teknosha P3 brake controller that I want to install in my 2021 Ford Bronco Sport Badlands. Do you have a specific adaptor harness for the Bronco Sport so I dont have to cut any wires I used this same P3 on a previous Nissan Pathfinder with an adaptor harness. I didnt see one listed on your website for the Bronco Sport. 2 The Bronco Sport only comes with a 4-pin trailer connection. Do you have a kit that would allow me to install a 7-pin Ford connector too similar to what newer trucks have where they have both connections side by side. Thanks.

asked by: Jonnie T

Expert Reply:

For installing the Prodigy P3 part # 90195 in your 2021 Ford Bronco Sport with a 4-way the kit you need is the # ETBC7 which will adapt your 4-way to a both a 7-way and a 4-way and comes with everything needed to install the brake controller too. This does require hardwiring though as your vehicle does not come with brake controller pre-wiring.

expert reply by: Jameson C