Comparing Draw-Tite and Curt Trailer Hitch Receivers for 2022 Acura MDX
Question:
What is the difference between these 2 products? 2022 Acura MDX Curt Hitch and 2022 Acura MDX Draw-Tite Hitch
asked by: Bill C
Helpful Expert Reply:
The Curt # C22HR and Draw-Tite # DT42MR are both very similar. Each is a Class III hitch with a 2" receiver and a concealed cross tube. They have the same maximum gross trailer weight of 6,000 lbs and tongue weight of 900 lbs.
The main difference is that the Draw-Tite sits a little higher with better ground clearance. This does, however, mean that trimming of the fascia is required. The # DT42MR also comes with a bracket welded on for trailer wiring. Ultimately I would recommend the Draw-Tite for the clearance. If you would rather not do any trimming or cutting of the fascia, the Curt would be the way to go.
If you plan on doing some towing you will also need wiring to power your trailer's signal lights. For the most reliable option I recommend the Tekonsha T-One Vehicle Wiring Harness # TK59VR. This plugs into existing wiring, so no cutting or splicing is required. It will provide you with a 4-way connection at the back of your vehicle.
If you also need a ball mount, check out the etrailer Ball Mount Kit # 989900. This kit has two ball mounts, one with a 3/4" rise or 2" drop and the other with a 2-3/4" rise or 4" drop. It also comes with a 1-7/8" and 2" ball, as well as a ball mount bag to store everything in.
I have attached installation videos for the Draw-Tite hitch and wiring harness for your reference.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >