What Roof Cargo Basket will Fit My 1-3/4 Inch Diameter Crossbars?

Question

Question:

Hello. will the Yakima Skinny Warrior fit on crossbars with 1-3/4inch diameter crossbars? thanks!

asked by: Trevor M

0

Expert Reply:

Judging by the measurement you provided, I assume you have round-style crossbars that are 1-3/4 inches in diameter (as opposed to aero crossbars or square crossbars). Unfortunately, I confirmed with my tech at Yakima that the Skinny Warrior # Y07014 will not fit your crossbars. This is because the Skinny Warrior is designed to work with Yakima Round crossbars like the # Y00408 which measure 1-1/8 inch in diameter.

However, for a great alternative that will definitely clamp around your crossbars, I recommend the Aluminum Roof Mounted Cargo Basket - 44" Long x 39" Wide x 7" Deep # 288-09200. This basket fits crossbars up to 2 inches tall x 4-3/4 inches wide. It also has a 150-pound weight capacity. As with all baskets, I recommend confirming with your crossbar specs and your user's manual to make sure that your roof rack and vehicle can hold that much weight.

If you are looking for theft deterrence, the best way to add security is to purchase the etrailer Cable Lock # e98891 and channel it through the basket while wrapping it around the crossbars. Also, if you need straps to transport your cargo, the etrailer Cam Buckle Straps # E98876-2 work great.

expert reply by: Bob C

0

Answer 1

The Yakima LoadWarrior Roof Rack Cargo Basked #Y07070 that you referenced will fit on the aerodynamic elliptical shaped Rhino-Rack crossbars on your 2016 Mazda CX-3. I spoke with my contact at Yakima and he confirmed that the universal mounting…

view full answer...

Answer 2

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

Answer 3

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 4

Yes, the Inno Rod Box Rooftop Fishing Rod Carrier #IN52FR is going to fit on a set of Rhino-Rack Aero cross bars like the Vortex #RRVA150B-2. The Inno Rod Box will fit a cross bar up to 3-1/2" wide and 1-3/8" tall and as small as 1"…

view full answer...

Answer 5

Yep, you can absolutely just upgrade the 800 lb trunnion bars to 1,200 lb bars on your Reese Strait-Line weight distribution hitch and not have to get any parts. All you will need are two of the following: - Replacement Trunnion Spring Bar for Reese…

view full answer...

Answer 6

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Yes, if you use the extension #Y07016 with the Yakima SkinnyWarrior Roof Rack Cargo Basket #Y07014-16 it will work fine with your 2023 Toyota Tacoma.

view full answer...

Answer 10

The Rhino-Rack Roof Mounted Steel Cargo Basket - 57" Long x 42" Wide - 165 lbs #RMCB02 has lower brackets that measure 1-1/8" tall (see attached photo). As long as you have 2" of clearance between the bottom of the crossbar and…

view full answer...