How to Find a Replacement Spindle and Hub for a 5x10 SnowBear Utility Trailer with 2000 lb Axle
Question:
Hello I have a 5X10 SnowBear utility trailer, 2000# axle. I need to replace the complete hub and spindle. Do you know which one I would need? Thanks
asked by: Dave
Expert Reply:
We do have spindles and hubs for 2,000 lb axles, but we first want to determine which spindle and hub will work best for you. To do this we will need additional information about your current spindles and hubs to ensure the new spindle and hub match what you currently have. Unfortunately SnowBear does not provide general spindle and hub information for their trailers.
The best way to ensure you get the correct spindle and hub is by using the part numbers of your bearings and grease seal. We will also need to know if you have a square or round axle, the diameter of the axle and the bolt hole pattern of your wheels. I have attached a photo showing where the part numbers of the bearings and grease seal can be found and an FAQ article on how to determine your wheel bolt pattern.
If you are unable to locate the part numbers on your bearings and grease seal, we can also find the correct spindle based on the measurements of your current spindle. The photo that I attached shows the spindle measurements we will need. These measurements must be precise, so using a dial caliper would be best. Using a ruler or tape measure would not be sufficient.
Once we have that information, I can recommend the correct parts for you.
Product Page this Question was Asked From
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: snowbear trailer
- Q&A: Does the LH45FR Come with Lug Nuts and Center Caps
- Q&A: Recommended Lug Nuts and Balancing For Lynx Wheel # LH45FR
- Q&A: How to Determine if Kenda ST145R12 Tire and Wheel Will Fit
- Q&A: Is a Hub Lug-Centric or Hub-Centric if it Uses Bolts with a Tapered Head
- Q&A: Will The AKIHUB-545-2-1K Hub Fit My SnowBear 5x8 Utility Trailer?
- Q&A: Is a Load Range D Trailer Tire Better for Long Trips than a Load Range C of the Same Size
- Q&A: Bearing Buddy for a SnowBear Trailer with 1-15/16 inch Hub
- Search Results: kenda st145r12
- Search Results: snowbear
- Search Results: kenda karrier
- Search Results: st145r12
- Search Results: 5.30 x12 tire
- Search Results: lug nut
- Shop: Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30820 Review
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range D
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Suspension Enhancement
- Video: Americana Tires and Wheels AM90049 Review
- Video: Wheel Stud Installation on a Boat Trailer
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU59FR
- Video: Review of DeeMaxx Trailer Bearings Races Seals Caps - Stainless Steel Cap with Plug - DE69YR