Will The HydraStar Disc Brake Kit for Triple Axle Trailers Be Compatible With 7k Dexter Axles
Question:
I have a 2018 Vengeance TH with 3 7K Dexter axles. needing to know if the HydraStar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13 Hub/Rotor - 8 on 6-1/2 - 7K Item # HSE7K-TR1 kit is the correct one. thanks
asked by: Joe G
Helpful Expert Reply:
Yes, the HydraStar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K # HSE7K-TR1 should be a compatible fit for your triple 7k Dexter axles. You'll just want to double check that the bearings match your spindle. This kit uses Inner bearing # 25580, Outer bearing # 14125A, Inner race # 25520, Outer race # 14276, and Grease Seal # GS-2250DL.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Race for 14125A Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.717 Inch O.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Race for 25580 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.265 Inch O.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Triple Axle Disc Brake Conversion Kit
- Q&A: How To Run Steel and Rubber Lines For Disc Brakes In Trailer
- Q&A: What is the Difference Between the HSE7K-TRI and HSE7K-TR1SO
- Q&A: Hydraulic Brake Kit For a Ez 4 Kaufman Car Hauler Trailer With 7,000LB Axles
- Q&A: Parts to Convert 2017 Grand Design Momentum 376TH to Electric Over Hydraulic Disc Brake
- Q&A: Will Hydrastar Disc Brake Kit Fit 7k Lippert Axles
- Q&A: Hydrastar Disc Brake Kit For a 2018 Grand Design Momentum Triple Axle Toy Hauler With 7,000LB Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class