How To Remove Stuck Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Prep

Question:

I trying to remove to remove the plate from my truck and it it is totally stuck in the holes. I tried moving the the locking pin several different positions and even tried using a pride tool but it is definitely stuck Any suggestions on what could cause this to happen and how to fix it would be greatly appreciated

asked by: Mark A

Expert Reply:

The Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package part # DM6200 requires that the locking plates be perpendicular to the bed sides for removal (reverse of installation). If the plate will still not budge once this is done there is likely rust inside the hitch ball opening and you'll need to use lube and or heat with force to remove it, there are no tricks really. I recommend trying to use the trailer jack to lift it out while still attached if possible.

Please note, you should be regularly applying grease to the opening if the adapter is left in the truck bed when not in use.

expert reply by: Conner L