Dimensions of CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
Question:
Hello, I need to replace the hubs on my USA Store MT3 motorcycle trailer. Hub’s constant of: • 5 stud x 4.5inch bolt circle diameter • 1-3/8inch tapered to 1-1/16inch spindle Grease Seal I.D. 1.73”, 1750 lb. capacity • L68149 inner bearing • L44649 outer bearing • 6” wheel flange diameter, wheel flange width 0.567” • 1/2 Inch studs • Running 13 Inch wheels • The grease seal side hub height is 1.88” from the wheel flange surface My questions, what is the CE. Smith CE13511 grease seal side hub height from the wheel flange surface? What is the wheel flange width? Is there a hub sketch available with these dimensions? Thanks, David
asked by: David L
Helpful Expert Reply:
The hub flange outer diameter on the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13511 is 6-1/2". I went out to the warehouse and measured the hub height on the grease seal side. Measuring from the highest point where the wheel studs are is 1-1/2". Measuring from the depressed spot in between the wheel studs is 2".
I have attached a video review as well as a diagram showing the measurements for your reference.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Replacement Bearing Buddy Bras - Model 19B - (Pair)
- Video: ArkPak 730 Portable Power Station with Inverter Review
- Shop: Nerf Bars - Running Boards
- Search Results: step bumper
- Search Results: tires and rims
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Replacement Bearing Buddy Bras - Model 23B - (Pair)
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Review of Curt Trailer Breakaway Kit - Kit with Charger - C52042
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-1K
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: Review of LubriMatic Grease and Lubricants - Multi-Purpose Lithium Grease - L11315
- Q&A: Will CE Smith Trailer Hub Assembly for 3.5K Axles - 5 on 4-1/2 - CE13511 Work with 14 Inch Wheels
- Search Results: trailer emergency brake
- Q&A: Replacement 3500 Spindles for Lund Boat Trailer
- Q&A: Which Grease Should be Used with a Dexter Trailer Axle
- Q&A: Is Red Grease Good for Boat Trailer Hubs
- Q&A: Grease Recommendation to Use on Trailer Hub/Drum Kits
- Q&A: What Grease Seal is Used in the CE Smith Trailer Hub CE13511
- Q&A: Can CE Smith Trailer Hub Replace Hub that Was on EZ Lube Axle
- Search Results: 7 way junction box
- Search Results: junction box