Can 291 lb Dirt Bike be Carried on etrailer Motorcycle Carrier with Hitch Capacity of 360 lbs

Question

Question:

I have a dirt bike that weighs 291lbs and I my Chrysler Pacifica 2017 tows 3600lbs factory. with the factory hitch class 3 Is 10 of the tow capacity OK for tongue capacity. Can I use the the bike tow platform you sell with my bike on it, with my Chrysler Pacifica 2017? Appreciate it!

asked by: Edgar P

0

Expert Reply:

It would be cutting it pretty close but with a dirt bike that weighs 291 and the etrailer cargo carrier # e98873 you'd be at 349 lbs which would be less than 10 percent of your 3,600 lb trailer towing capacity which would be 360 lbs.

expert reply by: Jameson C

0

Answer 1

I have a possible solution for carrying your KTM. The Ultra-Fab Motorcycle Carrier, part #UF48-979033 would be a good bargain-priced option. The carrier has a 500 lb capacity and the ramp is included. This carrier is only compatible with hitches that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Can 291 lb Dirt Bike be Carried on etrailer Motorcycle Carrier with Hitch Capacity of 360 lbs

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching