Why Wont The Control Panel On My Lippert 6 Point Leveling System Turn On
Question:
What could cause a Lippert 6 point leveling system to not light up/start up if I dont see any breaker/fuse issues?
asked by: Jeffrey P
Expert Reply:
Generally I would start by saying to reset the system, but if the control panel wont even turn on, that makes that a moot point. So with that being said, you are going to need to test the wires that supply power to the control module and the control panel ( # LC421484) as this would be the only other cause for what you are seeing. Or technically not seeing, I guess.
If you do not have power going to the control module, you have a break in the wire leading to the system somewhere. You will need to trace this wire and repair said break. If you do have power going into the unit, but not coming out, it will need to be replaced. I would also check for an in-line fuse/circuit breaker that could have tripped.
If you have power going into the control module and coming out, follow the power line going to the # LC421484 control panel. If you find a break, repair and check to see if the panel is working now. If you now have power going to the panel and still nothing happening, you will need to replace the # LC421484.
One of these should get you back to being a happy camper, but if it does not, let me know and we can try something else.
Products Referenced in This Question
Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Control Panel
- Lippert
more information >
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Which Lippert Ground Control 3.0 System Is Recommended for a 37' Fifth Wheel
- Q&A: Hole To Hole Dimensions For Replacement I-Beam Jack Bracket # LC349975
- Q&A: Solutions To Add More Clearance For Lippert Ground Control 3.0 Jack Legs
- Q&A: Is The Pad For The Replacement 22-1/2" Legs For The Ground Control 3.0 Welded Or Pinned In Place
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Wiring Diagram and Fuse Location for the Lippert Ground Control 3.0 4-Point Leveling System
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Wiring Installation for 5th Wheel Landing Gear Switch
- Q&A: Wiring Guide for Installing 5th Wheel Landing Gear Motor Switch
- Article: The Best 5th Wheel Hitches
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: Best 2020 Heavy Duty Trucks for Towing a 5th Wheel
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs