What Size Lube Plate Fits B&W Companion OEM 5th Wheel Hitch for Ford Super Duty # BWRVK3305

Question

Question:

What size lube plate works with this hitch. Thanks

asked by: Josh H

0

Expert Reply:

The lube plate size that B&W has recommended is 10", although the 12" will also work. The lube plates that are 10" are the Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter # RP83002 and the Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721 will both work with the B&W Companion.

expert reply by: Thomas M

0

Answer 1

To determine which Flex Air pin box will fit your Grand Design Solitude 391DL you'll need to first determine your pin box bolt pattern. There will typically be a sticker somewhere on the pin box or mounting ears that has a serial number,…

view full answer...

Answer 2

The B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package #BWRVK3710 you're looking at will fit your truck just fine, as this hitch was actually designed to be dropped into the OEM pucks you have on your truck. The…

view full answer...

Answer 3

So the ideal amount of clearance between the trailer overhang and the bed rails of the truck is 6 inches while the trailer is sitting as level as possible. If your trailer sits perfectly level and you currently have 5 inches you probably will be fine…

view full answer...

Answer 4

The B&W #BWRVK3710 hitch base has two options for horizontal location of the pivot arms. Since you do not have an 8-foot bed, I would choose the option that places the king pin closer to the rear bumper. This still won't allow a 90-degree…

view full answer...

Answer 5

The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 allows you raise and lower the left or right side jacks by selecting them on the control panel. This will raise and lower all the jacks on that side as there is not an…

view full answer...

Answer 6

It is indeed the same product. Curt, and TrailAir are both owned by Lippert, so it's the same exact product as the Lippert TrailAir you ordered, just with a Curt sticker on it.

view full answer...

Answer 7

There is not one specific recommended pressure for the air bag in the Trailair Air Ride 5th Wheel Pin Box #LC155943. The bag's pressure can range from 20 to 120 psi depending on your situation. After some miles you'll likely find the sweet…

view full answer...

Answer 8

Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated I'd recommend going with the Gen-Y #325-GH-8040 shock absorbing pin box versus a Trailair Flex Air like part #LC328492. The Trailair features a…

view full answer...

Answer 9

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

view full answer...

Answer 10

Thank you for the information and photo! I was able to determine that you have a 1621 SHD (super heavy duty) pin box rated for 21K. The Gen-Y equivalent is found as part #GY68GR for a 4.5K tongue weight or part #GY46FR for a 5.5K tongue weight. While…

view full answer...

Answer 11

If you're getting that much bounce out of your trailer that would lead me to believe that maybe the MORryde IS suspension system is the actual issue. Typically if the suspension is too stiff you'll start to bounce. We see this issue a lot…

view full answer...

Answer 12

The hitch ball you are looking for is the Curt #C60692 which fits the OEM rail kit of your 2012 Ford F-250 and also is compatible with the Curt CrossWing part #C92DR that you referenced as well.

view full answer...

What Size Lube Plate Fits B&W Companion OEM 5th Wheel Hitch for Ford Super Duty # BWRVK3305

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching