How To Determine The Correct Trailer Brake Assembly
Question:
2018 Grand Design Reflection 30 foot bumper pull. How do I determine which parts will fit ? I need brake assembly, bearings, retainer clip, washer, axle nut.
asked by: Rusty B
Expert Reply:
Thank you for the picture it helps a lot when determining these parts!
Reading the label tells me this is a Dexter D52 axle with a capacity of 5,100lbs, with that information I recommend using the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-459 for the right side, and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-458 for the left side.
For your bearings you'll want the Bearing Kit for Trailer Brakes with 12" Hub/Rotor # DBRKHW6EZ.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Bearing Kit for Trailer Brakes with 12" Hub/Rotor - Easy Grease - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 5200 lbs
- 6000 lbs
- Bearing 25580 and 15123
- etrailer
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Bearing Kit for Trailer Brakes with 12" Hub/Rotor - Easy Grease - 5,200 lbs to 6,000 lbs
- Search Results: 1/2" lug nuts
- Video: Review of etrailer Bearing Kit - DBRKHW6EZ
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Video: Review of Timken Trailer Bearings Races Seals Caps - Double Lip Grease And Oil Seal - TMK58ZR
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: Is There Differnce Between Trailer Grease Seals 10-36 and GS-2250DL
- Search Results: bearing packer
- Search Results: seal puller
- Search Results: drum
- Shop: Seal Puller
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-865-7-2-EZ-K Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-300 Review
- Q&A: What Size Axle Does a #84 Spindle Fit
- Video: CE Smith Bearing Protectors with Covers Review
- Video: Review of Kodiak Trailer Bearings Races Seals Caps - Caps - K7CAP
- Video: Performance Tool Seal Puller Review
- Q&A: Recommended Drum to Disc Brake Conversion Kit for 2017 Heartland RV Bighorn Fifth Wheel
- Q&A: Recommended Disc Brake Conversion Kit for Trailer with 7K Axles
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What Voltage and Amperage Should Trailer Brake Magnets Have
- Search Results: videos
- Search Results: bearing and seal kits
- Search Results: al ko