Replacement Hub and Drum Assembly for Equipment Trailer with Mobile Home Axles
Question:
I have an equipment trailer with 2 Mobile home axles, currently it uses 14.5inch wheels. What hubs or kit can I use to convert these axles to regular wheels? Both axles have brakes. They both use the same bearings, Outer bearing is LM67048 1.25” Inner bearing is unreadable, but measures 1.375”. The seal is 10-40.
asked by: Kris H
Expert Reply:
Based on the measurements you have taken, the inner bearing is the # LM48548. This is a bearing for an agricultural hub and does not match any hub and drum assemblies with the # LM67048 outer bearing. This is common with mobile home axles. More often than not the only option is to replace the axle, which is what you will need to do if you want to change the hubs and drums to use different wheels.
If you decide to replace your axles, you will need to know the capacity as well as the length of your axle. I have attached a diagram showing what you will need to measure. The length is the hub face to hub face distance. You can measure the spring center, or spring seat to spring seat, but this could be adjusted if necessary.
If you send me this information I would be happy to recommend a replacement axle for your equipment trailer. I have also attached a link to all of our available axles that you can check out and filter down by length and capacity.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM48548
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.375 Inch I.D.
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Tire Sizing
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Should There Be Any Play After Installing An Easy Grease Trailer Hub and Drum Assembly
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Recommended Nev-R-Adjust Brakes for a 6k Dexter Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)