Recommended Trailer Dolly for Moving a 2006 Aliner Expedition Trailer In/Out of Garage For Storage
Question:
I am a bit confused about weight capabilities for the trailer dollies. I have a 2006 Aliner Expedition, hitch weight 135 and weight apprx 1200, with only minimal extra cargo inside when storing. What dolly would you recommend to assist me getting my camper in my garage? I see in one of your posts, a picture of what appears to be a small dolly attached to a camper that looks very much my mine. Thanks so much for any advise.
asked by: Cathy J
Expert Reply:
The Rack'em Trailer Dolly # RA20 that you saw will support up to 500lbs of tongue weight and your 2006 Aliner Expedition has only 135lbs so there you are well within the limits. This dolly does not have a limit to the trailer weight as this will be limited by how much you can push and/or pull while it is being moved. Do remember if there is a slope going into or out of the garage that you will need to be able to push or stop the trailer with the incline. Since this dolly only comes with a 1-7/8" ball and all Aliner trailers use a 2" ball this may not be the best manual dolly available.
For the easiest option I recommend the Trailer Valet XL Trailer Dolly # TVXL2 which comes with a 2" hitch ball and will allow for you to easily move the trailer around with either the manual crank handle or by using the included Drill Attachment # TVDA on your cordless drill. If you need to stop the trailer the automatic brake will hold the trailer until you are ready to move again. This is capable of moving trailer up to 10,000lbs with a tongue weight up to 1,000lbs.
Products Referenced in This Question
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly
- Accessories and Parts
- Trailer Dolly
- Trailer Dolly Parts
- Drill Attachment
- Trailer Valet
more information >
Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2 Inch Ball
- Black
- Trailer Valet
more information >
Product Page this Question was Asked From
- Trailer Dolly
- Manual Dolly
- 500 lbs Capacity
- 16 Inch Tall
- 17 Inch Tall
- 18 Inch Tall
- 19 Inch Tall
- 1-7/8 Inch Ball
- Black
- RackEm
more information >
Continue Researching
- Video: Best Trailer Dolly Options
- Search Results: back up camera
- Shop: Trailer Wiring
- Shop: Rack'Em Trailer Dolly
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Recommended Trailer Dolly for 16 Foot Long Enclosed Trailer
- Q&A: Can Rack'em Trailer Dolly # RA20 be Used with Trailer that has 2 inch Ball Coupler
- Q&A: Tires For Load Rite PWC Trailer With Higher Speed Rating
- Q&A: Can Rack'em Trailer Dolly be used with Coupler that Has 2-5/16 inch Hitch Ball Size
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Q&A: Low Cost Trailer Dolly for Use with 2-Inch Trailer Coupler
- Q&A: Projection of Draw-Tite and Curt Class V Trailer Hitches for a 3rd Gen GM 2500/3500 Truck
- Article: How to Measure for Trailer Hitch Drop
- Article: Blue Ox Tow Bar Features
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Back Up a Trailer
- Article: Trailer Tire Sizing
- Article: 5 Things to Know About Weight Distribution Hitches