Recommended Replacement Brake Assembly For A Lippert 122259
Question:
Im looking for a brake assembly but unsure how to figure out what I need. Ive found Axletek 12-GGinch on the back of the assembly. The drum is 12x2 1/4inch and the actual brake pad is 2inch wide. Ive attached pics of what is currently on the trailer. Please let me know if there is anymore information I can provide, I know very little about the subject. Thanks
asked by: Perrin
Expert Reply:
You actually have the very common 12" x 2" brake assembly for a 5,200 pound to 7,000 pound axle. The picture you supplied also shows that you have standard manual adjusting brakes, so if you were replacing both the left and right sides, I highly recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies # AKEBRK-7-SA as they will be a direct bolt on replacement. Not only does this include both the left and right side brakes, it will also upgrade you to self adjusting. This makes the brake basically maintenance free after you get them installed.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-300 Review
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Timken Replacement Bearing and Race Set - LM67048 and LM67010
- Shop: Grease Seals 10-36 (pair)
- Search Results: 122259
- Search Results: akebrk~7r~sa
- Search Results: grease zerk
- Video: Review of Powerbuilt Lubricants Sealants Adhesives - Greasing Tools - ALL647646
- Search Results: greasing tools
- Q&A: What is the Grease Seal ID for the Dexter 7K Trailer Axle
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Q&A: Upgrading a 5,200 lbs Axle to a 7,000 lbs Axle
- Q&A: How Do I Know What The Capacity Of The Axles Are On My Trailer?
- Q&A: Replacement Brakes and Seals for my AxleTek B12E-02 12-GG Axles
- Q&A: Can Electric Trailer Jack Be Powered without Trailer Battery
- Q&A: How to Perform Manual Override on Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System
- Video: etrailer Electric Trailer Brakes Installation on a 2017 Grand Design Reflection Fifth Wheel
- Video: etrailer Trailer Brakes AKEBRK-6L Review
- Search Results: 12x2 brake shoes
- Search Results: wheel bearing grease
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: lippert 4400 lb axle