How to Find Correct Idler Hub for 3,500 Lb Air Tight Hubs
Question:
I need to get a full idler hub assembly to work with the spindle that comes with the emergency spindle system E-Axleinch made by Air Tight Hubs. Picture of the spindle is attached, I have the version made for 3500 lb axles, and 5 x 4.5 lug pattern wheels. Are you guys familiar with what spindle they use, and what hub/bearings/etc that I need?
asked by: Mark
Expert Reply:
I don't have specifics on any one particular trailer axle but most 3,500 lb axles will use a L68149 inner (1.378") and a L44649 (1.063") outer bearing. This can be confirmed by measuring but if it's correct you can use the Dexter Trailer Idler Hub Assembly part # 84545UC1-EZ for an exact fit option.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 28-1/2" Lift - 7,200 lbs
- Shop: Timken Replacement Trailer Wheel Bearing - HM212049
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Search Results: timken bearings
- Article: Most Popular Wheel Bearings
- Q&A: Replacement for Dexter 8-248 Idler Hub
- Q&A: Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Trailer Hub for Dexter 8-248
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Trailer Tire Sizing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How To Find Correct Hubs for 3,700 Lb Axis Products Trailer Axle
- Q&A: Are the Safety Struts for the etrailer Cargo Carrier Included
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams