What is Hub Pilot Diameter of Trailer Hub # AKIHUB-550-35-K
Question:
Hello. Was curious what the outside diameter of the hub bore size is. Thank you
asked by: Cory
0
Expert Reply:
The hub pilot diameter of the hub part # AKIHUB-550-35-K is 2.62 inches. That means that a trailer wheel would need to have a pilot diameter of at least 2.62 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Differences Between Trailer Idler Hubs With a 5 on 5 Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Idler Hub for 3,500 lb Big Tex Trailer Axle with 5 on 5" Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Maintenance Schedule
- Q&A: Availability Of Trailer Idler Hub With 5 on 5 Bolt Pattern
- Q&A: Parts Needed To Switch a 3,500LB Axle To 5 on 5" Idler Hubs on 5X8 Utility Trailer
- Q&A: Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
- Q&A: How To Tell The Difference From Right and Left Electric Brake Assemblies
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Hub Recommendation for Timbren Axle-Less System ASR1THDS03 with Jeep Bolt Pattern
- Article: Measuring a Trailer Tire