Troubleshooting Trailer Running Light Circuit of 2013 Ford F-250 Not Working
Question:
No power to Running light pin on 2013 F 250
asked by: Eric P
0
Expert Reply:
Typically this is just a blow fuse situation so check the owners manual of your truck to see find that fuse and replace as needed. Or it can be as easy as some corrosion or dirt on the pins of the 7-way which you can fix with just some sand paper. Also check the wiring that leads to the back of the 7-way and fix as needed if there's any cuts in it.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Q&A: All Parts Needed to Flat Tow 2014 Chevy Silverado 1500 Behind Motorhome
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Recommended Flat Towing Parts for a 2024 GMC Canyon Denali
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Q&A: Troubleshooting 7-Way Installation that Has No Right Turn or Stop Lights on Trailer