Troubleshooting Fail Message of AIr Lift WirelessAIR Compressor Remote
Question:
My remote won’t pair, I ground it and get it to go into pairing mode but the remote constantly says FAIL and the end. Any ideas? This is the remote the girl at air lift said worked with my system BTW.
asked by: Max
Expert Reply:
We have spoken with Air Lift regarding the "FAIL" error message you are getting on the Air Lift Wireless Remote # AL73002 for your compressor system. They stated that if the remote is still working fine to inflate the bags and check their pressures, the error code is likely resulting from a couple different possible causes.
The first possible cause might simply be a loose ground connection on the system. I recommend checking to make sure that your ground is secure and then try re-joining the controller with the manifold just to ensure a good pairing.
Otherwise, they stated that this message can sometimes occur if the check or inflate button is pressed too quickly. In this case, the error message will show up but the unit will still work to inflate the air bags like normal.
If you still cannot clear this message from the monitor, please let me know and I will be happy to look into this further.
