bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Which Replacement Hubs and Bearing Kit Fits Older Axle W/ LM67048 and 25580 Bearing Combination  

Question:

I found this number 4T-LM67048 and 4t-25580 bearing. I need a seal but I cant find any number. The Spindles sizes are 1.25inch and 1.75. I will like to purchase the kits for six wheels . And get the price for the brakes. Thank you!

0

Expert Reply:

Thanks for the pictures and measurements!

Since your hub uses inner bearing # 25580 and outer bearing # LM67048 you will need to go with six of the Bearing Kit # BK3-310 if you are wanting to reuse your hubs, and if you are needing new hubs you will need the Dexter # 8-201-5 along with the above bearing kit.

This includes new bearings, races, cotter pin, tang washer, and grease seal # GS-2125DL which matches the dimensions in your picture.

Based on this bearing combination you have a 5200lb axle and should use brake assemblies # AKEBRK-7R-SA and # AKEBRK-7L-SA. These use a 5 bolt mounting pattern shown in the included diagram, so you will want to measure your mounting pattern to confirm this is correct.

I included a few videos of the products mentioned for you to take a look at.

expert reply by:
0
Samuel C
5-Bolt Brake Mounting Flange Pattern
5-Bolt Brake Mounting Flange Pattern
(click to enlarge)
Customer Picture
Customer Picture
(click to enlarge)
Customer Picture
Customer Picture
(click to enlarge)
Ask The Experts a Question >>

Products Referenced in This Question








Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

etrailer Trailer Brakes AKEBRK-7R-SA Review
etrailer Trailer Brakes AKEBRK-7R-SA Review - Video
TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-310 Review
TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-310 Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>