Recommendations for Adding a 2k Trailer Axle to a Fabricated Frame
Question:
Hello, I am fabrication a trailer that is 60 inches wide. Its a 5x10. I am planning on mounting 15 inch tires. The trailer frame is for a tear camper and will weight 1300lbs at most. can you recommend an axle that will fit the size of my frame? I would also like to add brakes to the axle. Im just not sure what size length would be best for the frame. thanks in advance for your help!
asked by: Erik G
Expert Reply:
We have a couple different options available for your trailer that you are building. The first will be a standard axle set-up.
The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs # T20BTR-EZ-7258 will measure 58 inches from the center of one spring seat to the center of the other. This should work perfectly fine with your 60 inch wide frame, but you will need to add the Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34 onto the axle as it is not set up for brakes. The Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # 23-47-48 will then bolt onto this plate. From here, the Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2 # 8-257-5UC3-EZ will complete this axle.
However, you could also check out the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 2,000 lbs # ASR2KHDS01. This will bolt directly to the frame and the distance between the frame will not matter. This makes them a lot more adaptable and as they do not have a bar going across the frame, you will have independent suspension. This also has brake mounting flanges pre-installed, so the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 can be bolted straight on. The etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-EZ-K will then complete this set up if you choose to go with it.
You will of course need some other odds and ends like wire, leaf springs, hangers, and shackles, but all this will depend on which way you choose to go and where things will be mounted.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Manual Ball Removal
- 7500 lbs TW
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 2-5/16 Hitch Ball
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 5th Wheel Towing Capacity and Hitch Recommendations for a 2016 GMC Sierra 2500HD Short Bed
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Does Heat Shield on 2016 GMC Sierra 3500HD have to be Removed to Install B&W Gooseneck Trailer Hitch
- Q&A: Solution for Fogatti Water Heater With E8 Error Code But Exhaust Isn't Clogged
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Recommended Pickup Truck Choice for Towing 20K Jayco Pinnacle 5th Wheel
- Q&A: Can B&W Turnover Ball, Offset Gooseneck Ball & Andersen Ultimate 5th Wheel Connection work Together
- Q&A: How to Determine Needed Pilot Diameter of Steel Dual Trailer Wheel
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Gooseneck Trailer Hitch Information and Review
- Article: Best 5th Wheel to Gooseneck Adapters (2023)