Which Wires Are the Diodes Installed on for the Tail Lights on a 2018 Jeep Wrangler JL
Question:
when i check for the tail light wire to use i find 2 wires with power. a white and gray and a white and red. which one do i use to connect the diode to?
asked by: Erich W
0
Expert Reply:
I can confirm when installing the Roadmaster Universal Hy-Power Diode Kit # RM-154 on a 2018 Jeep Wrangler JL that the tail light wire on the driver's side is white and grey, and the tail light wire on the passenger side is white and orange. These will be the wires you'll use to connect the diodes on the kit to.
I've also linked an installation video of this wiring kit on a similar Wrangler JL for you to use as a reference.
expert reply by:
Erik B
0
Product Page this Question was Asked From
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: Must-Have Flat Towing Components
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Q&A: Lighting and Wiring Options for Flat-Towing a Jeep Wrangler Behind a Motor Home
- Q&A: coupler
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Class I Trailer Hitch for a 2021 Mercedes-Benz E-450
- Q&A: Do You Have to Cut Front Fascia of 2024 Ford Maverick to Install Demco Base Plates to Flat Tow
- Q&A: Complete Flat Towing Setup for a 2024 Ford Maverick
- Q&A: Does Roadmaster Base Plate Kit fit 2024 Jeep Wrangler 4xe X with Steel Bumper and Factory Winch