Will Dexter Axle Beam 7359765 Replace Bent 95" Hub Face To Hub Face Dexter Axle?
Question:
I have a Dexter axle assembly with electric brakes. The number on the sticker on the tube is AX359580B-X It is 95inch hub face and 80inch spring center axle. axle sits on top of springs My brake components are fine and i can transfer them to a new beam. Is this the beam I need to replace my bent one?
asked by: Brad F
Expert Reply:
It sure is!
The Dexter Trailer Axle Beam # 7359765 you were looking at has the same 95" hub face to hub face and 80" spring center to spring center measurement as your current axle so this will be an exact replacement for you. The spring seats on this axle are located on the bottom so it will sit above your leaf springs just like your old axle.
Since you mentioned you brake components are in good shape they can be transferred over as this axle uses the same bearing combination of # L68149 and # L44649.
It is a good idea however to go ahead and replace the U-bolts and U-bolt plates with the # CE23002 to make sure your axle is securely connected to your leaf springs as that is the only thing securing the axle to the trailer.
I included videos of the recommended products for you to take a look at.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Leaf Spring Suspension
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Q&A: Does Dexter 3,500 lb Leaf Spring Axle Use Number 84 Spindle
- Q&A: Recommended 3,500 Lb Dexter Axle 94" Long at Hub Face
- Q&A: Dexter 3,500 lbs Replacement Axle
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs
- Video: Review 2 of Dexter Axle Trailer Axles - Leaf Spring Suspension - 7359765
- Shop: Suspension Enhancement
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Replacement U-Bolt Axle Mounting Hardware Kit - 3" Axles
- Q&A: What is the Torque Requirement for 1/2 Inch U-Bolts for Trailer Suspension
- Search Results: 5 on 4.75 rim
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation
- Video: Dexter Heavy Duty Suspension Upgrade Kit Review
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Video: Review of Dexter Trailer Leaf Spring Suspension - Suspension Kits - K71-359-00
- Search Results: 5 on 5 axle
- Q&A: Is It Okay to Pull Utility Trailer with Slight Spindle Damage?
- Q&A: Shifting Trailer Axle Back Into Place After Hitting Curb
- Q&A: Replacement # 84 Spindle Recommendation to Replace a Trailer Spindle