Does the Center Hole On the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs Need a Bushing
Question:
Can you confirm that the 7/8 inch center hole does not need a bushing on the 13-4 swan shaped equalizer? Thanks
asked by: Darren C
0
Expert Reply:
The Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs part # AP202 uses a 7/8" diameter wet bolt to secure the equalizer to the hanger. It does not require a bushing.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 9-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring Harness Recommendation for 2017 Lexus RX 350 with Towing Package
- Q&A: LaSalle Bristol XTRM Roof Membrane Install Kit Recommendation
- Q&A: Does The LaSalle Bristol RV Roof Membrane Ship Folded Or Rolled Up
- Q&A: Titan Brake Actuator With Manual Lockout for Drum Brakes # T63FR
- Q&A: Correct Replacement Oil Seal 225255UC for Ranger Boat Trailer
- Q&A: Can Dexter E-Z Flex Suspension Kit Replace Dexter 13-10 Equalizer
- Article: Trailer Maintenance Schedule
- Article: How to Survive the Winter In Your RV
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: Testing Breakaway Systems
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams