Do Old Spring Seats have to be Removed to Move Springs On Top of Trailer Axle
Question:
I just ordered a set of axel pads for a 2 3/8 round axel. Am putting the axel on the bottom of the springs, Do I have to cut the old pads off?
asked by: Tom W
0
Expert Reply:
You do not have to remove the old spring seats unless they cause a clearance issue. But keep in mind that the new spring seats will have to be welded to the axle. Welding should be performed by a qualified professional with experience working on trailers.
If you were to use an over-under conversion kit, # K71-384-00, you would not have to do any welding.
expert reply by:
Michael H
0
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Leaf Spring Suspension
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Video: TruRyde Trailer Suspension TRSS238 Review
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 95" - 7,000 lbs
- Shop: Kodiak Wrench Set - 1/4" Line Wrench, 3/8" Line Wrench, 1/2" Combination Wrench
- Q&A: Do Trailer Axle Spring Seats Weld to Axles
- Shop: Replacement Spring Seat for Dexter Trailer Springs Over-Under Conversion Kit - Qty 1
- Q&A: Is There a Load Range Chart for Trailer Tires
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Q&A: Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Q&A: Recommended 89 Inch 3,500 lb Axle & 5-Lug Idler Hubs For Boat Trailer
- Q&A: Comparing Dexter and etrailer Electric Brakes for 3,500 Lb Axle
- Q&A: Availability Of Dexter 3500lb Axle With 70.5" Spring Center Measurement
- Article: Slipper Spring Trailer Suspension System Review
- Video: Review of etrailer by AxleTek Trailer Axles - Leaf Spring Suspension - e38GR
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-EZ-8974 Review
- Video: Review of etrailer 4 Leaf Double Eye Spring - e97SR
- Video: Review of Kodiak Hand Tools - Kodiak Line And Comination Wrench Set - KLW
- Video: Kodiak Trailer Brakes BH-3MFS-1-5 Review
- Search Results: tapered spindle
- Search Results: spring seats
- Search Results: leaf spring replacement system
- Search Results: overslung
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Hitch
- Shop: Trailer Wiring