Passenger Side Electric Brake Assembly For 2009 Forest River R-Pod 172 Travel Trailer
Question:
Which model number for the passenger side electric brake R-Pod 172 2009.
asked by: Dave T
Expert Reply:
The part number you provided in the photo did not bring up any parts on my end, but if you already have electric brakes and you are just replacing the passenger side brake assembly then you will likely be able to use Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs # AKEBRK-35R-SA. This is commonly used on Forest River R-Pod 172 travel trailers like yours and this 10" brake is compatible with 13", 14", and 15" wheels.
Then if you need a new hub and drum assembly you can go with Dexter Hub and Drum assembly for 3500lb axle 5 on 4-1/2" AKHD-545-35-EZ-K as long as your wheels are the 5 on 4-1/2" lug pattern which my research tells me they are.
If you have a different setup than the typical setup mentioned above then feel free to provide photos and more information on your current setup so that I can find the correct parts for you.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Shop: Brake Controller
- Shop: Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - 2 Modes - 1 to 3 Axles - Proportional
- Shop: Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side
- Shop: TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 42" Long
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: How to Choose the Correct Brake Assembly for Trailer Axles
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub