Picking Out Trailer Hub Bearings for 6 Lug Agricultural Hub
Question:
I have a 6 bolt hub on ag running gear used as a hay wagon. The bearings and seals have no identifying numbers on the bearings or the seal. I also do not know the make or model of the running gear. No identifying marks have been found. The bearings measure out as outside bearing 1.25 inch inside dia., outside is 2.08 inches and is .65 inch in width. I believe this is a LM67048. The inside bearing measures 1.36 inch in dia., outside is 2.27 inches and the width is .72 inches. I believe this is a LM48548. The rear seal measures as .24 inches in depth, inside diameter 1.06 and the outside dia is 2.60 inches. Can you help me identify the correct bearings and deal to repair this hub?
asked by: Stephen L
Helpful Expert Reply:
The bearing numbers you mentioned do check out as what you'd need with the part # LM67048 for the outer bearing and part # LM48548 for the inner.
Now the grease seal dimensions don't quite add up though. Are you sure the inner diameter of the seal or the diameter of the spindle where the seal rides is 1.06 inches in diameter? Normally the seal surface is bigger than the bearing surfaces.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM48548
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.375 Inch I.D.
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Will Firestone Air Bags Interfere if I Install a B&W Gooseneck Trailer Hitch for a 2004 Dodge 2500
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Article: Trailer Wiring Diagrams
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Leaf Spring for 2020 Grand Design Reflection 240RL
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: How to Pick Out Bearings for a Dexter P-21 SLR Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide