How to Determine Correct Roadmaster Base Plates For 2001 GMC Sierra 2500 4WD w/ Sterling Tow Bar
Question:
Base plates for a 2001 GMC Sierra 2500 HD 4X4 Crewcab. Can you please tell me what base plates I need for my GMC Sierra with the Roadmaster Sterling All Terrain. I have looked at the frame on the front of my truck and cannot see where the bolt holes are to mount the base plates. My truck has the tow hooks installed. Thanks for your help.
asked by: Brad G
Expert Reply:
Since you have the Roadmaster Sterling All Terrain # RM-576 tow bar, you'll need the crossbar-style base plate kit for your 2001 GMC Sierra 2500 4x4. Since that generation Sierra had slight variances in the frame, you will need to take a measurement, and this assumes your tow hooks are bolted externally to the bottom of the frame
That measurement will be from the center of the lower-most threaded hole on the side of frame, to the center of the slotted hole on the bottom of the frame. I have added a diagram which displays this, and you should get a measurement of approximately 3 inches or 1-1/4 inches, which tells you the base plate you need:
- 3 Inch Measurement: Roadmaster Crossbar-Style Base Plate Kit # 131-15
- 1-1/4 Inch Measurement: Roadmaster Crossbar-Style Base Plate Kit # 131-17
Products Referenced in This Question
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Sterling All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 8,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Aluminum
- 8000 lbs
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Q&A: Replacement Lift Motor for Fantastic Vent in 2002 Teton 5th-Wheel Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can I get Replacement Keys For a Trailer Hitch Receiver Lock?
- Article: Trailer Wiring Diagrams
- Q&A: How To Charge 12v Batteries Wired in Parallel
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Using NOCO 2 Bank Charger With Parallel Batteries in Truck
- Q&A: How Long Does it Take to Install Roadmaster Base Plate Kit
- Article: Must-Have Flat Towing Components
- Article: Roadmaster Vehicle Specific Base Plates
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)