Replacement Needed for the Titan Hub T1721400042
Question:
i need to know availability for #T17214000247 . I would like to buy the hub complete with inner bearing LM67048 and outer bearing LM11949. Thank you for any help you can possibly give
asked by: Bryan
Expert Reply:
I have a potential alternate option, but unfortunately, the Titan Trailer Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Cast T1721400042 is no longer available from the manufacturer. As this uses an uncommon combination of inner and outer bearings, I recommend replacing the axle with a more common set up.
With that said, the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # 35545I-ST-89 will come with idler hubs and includes all bearings, seals, caps, and even grease. However, you will need to very a few measurements to make sure something like this will fit your trailer. This will measure 89 inches from hub face to hub face and then 74 inches from center to center of the spring seats.
Products Referenced in This Question
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: t1721400042
- Q&A: Replacement Hydraulic Drum Brakes for Dico 15638
- Q&A: Replacement for Dico 15638 Hub Drum and Brake Shoes for 10 Inch Atwood Hydraulic Brake Assembly
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range B
- Shop: Replacement Trailer Hub Bearing - LM11949
- Q&A: Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: etbc7
- Shop: Trailer Hitch
- Search Results: brake controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Video: Choosing the Right Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer brake controller
- Article: Trailer Tire Sizing
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Shop: Brake Controller
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: 25580
- Video: Review of etrailer - Brake Controller - ETBC7
- Shop: Suspension Enhancement
- Search Results: trailer wiring