Is There a Hitch Available for a 2013 Rushmore 5th Wheel Trailer?
Question:
Do you have a hitch available for my application?
asked by: Larry
Expert Reply:
We definitely have options for adding a hitch to the back of your 2013 Rushmore 5th wheel. We do have a few different attachment styles as well, so I have two options below.
First, and the way I recommend going, will be the Draw-Tite Multi-Fit Trailer Hitch # 82201. This is rated to hold up to 350 pounds of tongue weight and can be used to tow 3,500 pounds as well, which in your case I do not recommend doing. This can also be installed on a motor home, hence the towing rating. It will also fit frames that are 47 inches to 71 inches wide, making it extremely adaptable. The only downside with this is that it will most likely sit fairly far back under the body, so an extension may be needed.
The other option will be a bumper mounted hitch. The overall capacity of this style hitch will depend on the bumper on your 5th wheel, however. As an example, the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 will bolt around a 4x4 bumper. This will have the exact same capacities as the # 82201, but again, if your bumper is rated lower, the hitch will be as well. The plus with this style hitch is that you will not need any kind of extension due to where it will sit on the bumper.
Products Referenced in This Question
Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide
- RV and Camper Hitch
- Frame Mount Hitch
- 47 - 71 Inch Wide Frame
- 300 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Draw-Tite
more information >
Curt RV Bumper 2" Trailer Hitch Receiver
- RV and Camper Hitch
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
- Heavy Duty Receiver Hitch
- Weld-On
- 44 Inch Wide
- 1600 lbs TW
- 16000 lbs GTW
- Class V
- 2 Inch Hitch
- 7 Inch Drop
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Class V Hitch For A 2020 Ford F53 Chassis
- Q&A: How To Install Trailer Hitch Receiver On 1996 Toyota HiAce
- Q&A: Hitch Recommendation for a Ford E-450 Bus
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Trailer Hitch for an International 3800 School Bus
- Q&A: Recommended Trailer Hitch for a Isuzu Box Truck
- Q&A: Recommended 10K Trailer Hitch for Ford F-53 Chassis
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Which Hitches are Made in the USA
- Article: Troubleshooting Brake Controller Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)