Can a 3-1/2 Inch Spool Roller be Used in Place of a 4 Inch Spool Roller
Question:
I bought 3 4inch spool rollers Yates before i dicscovered your store and they turned out to be 3 1/2. If I use them there will be about 1inch of play within the bracket. Im trailering a 14foot daysailer about 450 lbs. will the short rollers be a problem?
asked by: Barre D
Expert Reply:
The short rollers will only be a problem if they present gaps in coverage or are otherwise not large enough for where they make contact with the boat. And if the play in them is too much, that could cause the boat to shift in transit. You can take up the space using washers. Ideally, you would want to replace the rollers with the right size like the 4 inch spool roller # YR410Y-4 that you have referenced.
Product Page this Question was Asked From
Yates Spool Roller for Boat Trailers - TPR - 4" Long - 1/2" Shaft
- Boat Trailer Parts
- Rollers
- Spool Roller
- Thermoplastic - Non-Marking
- 4 Inch Long
- Fits 1/2 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Flat Bow Stop for Tracker Trail Star Trailer
- Q&A: Bracket For The Bow Roller Assembly YR450Y-400Y
- Q&A: Replacement Bow Roller Brackets for Boat Trailer
- Q&A: How To Mount an Electric Boat Trailer Winch
- Q&A: How Does the CE Smith Winch Stand # CE31013G Mount to Trailer
- Q&A: Mounting Plates for Dutton-Lainson StrongArm Electric Trailer Winch, # DL25200
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Hand Winches
- Article: Trailer Tire Sizing
- Article: Overview of Lubricating Grease
- Article: Printable Trailer Bolt Hole Pattern Template